Frigidaire CRA106BT114 Air Conditioner Manual

The Frigidaire CRA106BT114 is a 10,000 BTU window-mounted air conditioner designed to cool rooms up to 450 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer for convenience. The unit is equipped with a remote control for easy operation and includes a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, programmable timer, energy saver mode, washable filter.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Fan Speeds	Multiple speeds for customized comfort.
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Remote Control	Convenient operation from a distance.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect contents. Ensure window is suitable for installation.

Install mounting brackets according to window size.
Position the air conditioner in the window frame.
Secure the unit and ensure it is level.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the unit and set the desired temperature.

Select cooling mode using the remote or control panel.
Adjust fan speed as needed.
Set the programmable timer for automatic operation.

CAUTION! Ensure the air conditioner is properly installed before use.

Specifications

Model: Frigidaire CRA106BT114.
Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.1.
Dimensions: 24 x 20 x 15 inches.
Weight: 70 lbs.

Controls and Settings

Access settings via the control panel or remote. Controls include temperature adjustment, fan speed, and mode selection.

Remote: POWER, MODE, FAN, TEMP UP/DOWN.

Settings: Adjust temperature, select cooling or fan mode, and set timer.

Connecting Power

Ensure the air conditioner is plugged into a grounded outlet. Use a dedicated circuit to avoid overload.

Check power supply voltage before plugging in.
Use a surge protector if necessary.
Do not use extension cords.

Tip: Always unplug the unit before performing maintenance.

Operating the Air Conditioner

Follow the instructions to operate the air conditioner effectively.

Press POWER to turn on the unit.
Select the desired cooling mode.
Adjust the temperature and fan speed as needed.
Use the timer for automatic shut-off.

WARNING! Do not block air vents for optimal performance.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the washable filter every month.
Inspect the unit for dust and debris.
Schedule professional servicing if necessary.

CAUTION! Always unplug the unit before cleaning.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Loose parts	Check for loose screws or debris.
Water leakage	Improper installation	Ensure unit is level and properly sealed.
Remote not working	Batteries	Replace batteries in the remote.

Reset: Unplug the unit for a few minutes to reset.

Service: 1-800-374-4432; www.frigidaire.com