Frigidaire CRA107BU115 Air Conditioner Manual

The Frigidaire CRA107BU115 is a compact 10,000 BTU window air conditioner designed for cooling rooms up to 450 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer for convenience. The unit is equipped with a remote control for easy operation and includes a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, energy saver mode, programmable timer, washable filter.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Remote Control	Convenient operation from a distance.
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Programmable Timer	Set the unit to turn on or off at specific times.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect contents. Ensure the window is suitable for installation.

Remove the air conditioner from the box and packaging materials.
Install the mounting brackets according to the window type.
Place the air conditioner in the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the unit and follow the on-screen prompts.

Select cooling mode using the remote control.
Set the desired temperature using the temperature controls.
Adjust fan speed as needed.

CAUTION! Ensure the air conditioner is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Power Supply: 115V/60Hz.
Energy Efficiency Ratio (EER): 12.0.
Dimensions: 18.5 x 21.5 x 14 inches.
Weight: 70 lbs.
Noise Level: 54 dB (low speed).

Controls and Settings

Access settings via the remote control or control panel on the unit. Options include cooling mode, fan speed, and temperature adjustments.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, use the remote control or the control panel. Select cooling mode, adjust temperature, and fan speed as needed.

Maintenance and Care

Unplug the unit before cleaning. Clean the washable filter regularly to maintain efficiency.

CAUTION! Do not use harsh chemicals or water on the unit.

Regulatory Information

Meets all safety standards and regulations for air conditioning units. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Improper installation	Check for secure mounting and level installation.
Water leakage	Clogged drain	Inspect and clear the drain line.

Reset: Unplug for 10 minutes to reset the unit.

Service: 1-800-374-4432; www.frigidaire.com