Frigidaire CRA226ST Air Conditioner Manual

The Frigidaire CRA226ST is a 22-inch window air conditioner designed for efficient cooling in small to medium-sized rooms. It features a cooling capacity of 8,000 BTUs, energy-saving modes, multiple fan speeds, and a programmable timer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Energy-efficient design, remote control, adjustable thermostat, multiple cooling speeds, and a washable filter.

Feature	Description
Cooling Capacity	8,000 BTUs for effective cooling
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Allows precise temperature control
Washable Filter	Easy to clean and maintain

Installation

Unpack and inspect contents. Ensure window frame is suitable for installation.

Remove the air conditioner from the box and packaging.
Install the mounting brackets according to the instructions.
Place the air conditioner in the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner; follow the setup instructions on the display.

Set the desired temperature using the remote or control panel.
Select the cooling mode: Cool, Fan, or Energy Saver.
Adjust fan speed as needed.
Use the timer function to set operation times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 8,000 BTUs.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V, 60Hz.
Dimensions: 22" W x 15" H x 20" D.
Weight: 70 lbs.
Noise Level: 54 dB (low), 60 dB (high).
Filter Type: Washable and reusable.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, TEMP UP/DOWN, FAN SPEED, MODE, TIMER.

Settings include: Cool, Fan, Energy Saver modes, and adjustable temperature settings.

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Ensure the unit is off before connecting to power.
Use a dedicated outlet to avoid overload.

Tip: Avoid using extension cords.

Operating the Air Conditioner

To operate, press the POWER button, set the desired temperature, and select the cooling mode.

Press POWER to turn on.
Set the temperature using the remote or control panel.
Select the fan speed and mode.
Use the timer function as needed.

WARNING! Do not block air intake or exhaust.

Accessibility Features

The air conditioner includes a remote control for easy access and operation from a distance.

Care & Cleaning

Unplug before cleaning. Clean the filter regularly and wipe the exterior with a damp cloth.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power	Check power supply and outlet.
No cooling	Incorrect settings	Ensure the unit is set to Cool mode.
Excessive noise	Improper installation	Check for secure mounting and level installation.
Water leakage	Clogged drain	Inspect and clear the drain line.

Service: For assistance, contact customer service at 1-800-374-4432.