Frigidaire CRA226ST21 Air Conditioner Manual

The Frigidaire CRA226ST21 is a 22-inch window-mounted air conditioner designed to provide efficient cooling for rooms up to 1,000 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer for convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital thermostat, remote control, adjustable air direction, energy saver mode, and programmable timer.

Feature	Description
Digital Thermostat	Allows precise temperature control
Remote Control	Convenient operation from a distance
Adjustable Air Direction	Directs airflow where needed
Energy Saver Mode	Automatically turns off when the desired temperature is reached
Programmable Timer	Set the unit to turn on/off at specific times

Installation

Unpack and inspect contents. Ensure window frame is suitable for installation.

Remove the air conditioner from the box and packaging.
Install the mounting brackets according to the instructions.
Place the air conditioner in the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Press the mode button to choose between cool, fan, and energy saver modes.
Set the desired temperature using the up/down buttons.
Adjust fan speed: Choose low, medium, or high fan speed.

CAUTION! Ensure the air filter is clean before first use.

Specifications

Cooling Capacity: 10,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 300 CFM.
Noise Level: 52 dB.
Power Supply: 115V, 60Hz.
Weight: 70 lbs.
Dimensions: 22" W x 15" H x 20" D.

Controls and Settings

Access settings via the digital display or remote control. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, mode, temperature, fan speed, and timer settings.

Connecting to Power

Ensure the air conditioner is plugged into a dedicated outlet.

Use a grounded outlet to prevent electrical hazards.
Avoid using extension cords.
Check the power supply before operation.

Tip: Ensure the outlet is easily accessible for maintenance.

Operating the Air Conditioner

Follow these steps to operate the air conditioner effectively.

Press the power button to turn on the unit.
Select the desired mode and temperature.
Adjust the fan speed as needed.
Monitor the room temperature for optimal comfort.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean or replace the air filter monthly.
Inspect the unit for dust and debris.
Ensure the drainage system is clear.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all relevant safety and efficiency standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Blocked drainage	Clear the drainage system.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-374-4432; www.frigidaire.com