Frigidaire CRA226ST213 Air Conditioner Manual

The Frigidaire CRA226ST213 is a 22-inch window-mounted air conditioner designed to provide efficient cooling for rooms up to 1,000 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer. The unit is equipped with a remote control for convenient operation, and it includes a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Troubleshooting 10. Regulatory Information

Features at a Glance

Key components: Energy-efficient cooling, multiple fan speeds, remote control, programmable timer, washable filter.

Feature	Description
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Remote Control	Conveniently adjust settings from a distance.
Washable Filter	Easy to clean and maintain for optimal performance.
Programmable Timer	Set the unit to turn on or off at specific times.
Multiple Cooling Speeds	Choose the desired cooling intensity for comfort.

Installation

Carefully unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable window for installation.
Securely mount the unit according to the included instructions.
Ensure the unit is level for proper drainage.
Plug into a grounded electrical outlet.

WARNING! Ensure the window is securely closed to avoid injury.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select the desired cooling mode using the remote control.
Adjust the temperature setting to your comfort level.
Set the fan speed according to your preference.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 300 CFM.
Noise Level: 52 dB (low speed).
Dimensions: 22 x 21 x 15 inches.
Weight: 70 lbs.
Power Supply: 115V, 60Hz.

Controls and Settings

Access settings via the remote control or the control panel on the unit. Features include power, mode selection, temperature adjustment, and fan speed control.

Connecting Power

Ensure the air conditioner is connected to a properly grounded outlet. Avoid using extension cords.

Check the power supply voltage matches the unit's requirements.
Plug the unit directly into the wall outlet.

Tip: Do not overload the circuit.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on the unit.
Select your desired cooling mode and temperature.
Adjust the fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean the washable filter every month.
Inspect the unit for any debris or blockages.
Schedule professional servicing if necessary.

CAUTION! Always unplug the unit before cleaning.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check the power connection and outlet.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Loose parts	Inspect for loose components and tighten as needed.
Water leakage	Improper installation	Ensure the unit is level and properly installed.

Service: For further assistance, contact customer support.