Frigidaire CRA226ST214 Air Conditioner Manual

The Frigidaire CRA226ST214 is a 22,000 BTU window-mounted air conditioner designed for cooling large rooms. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode to optimize efficiency. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air direction, and energy-efficient design.

Feature	Description
Cooling Capacity	22,000 BTU for large room cooling
Fan Speeds	Multiple speeds for customized comfort
Energy Saver Mode	Automatically turns off the fan and compressor when not needed
Programmable Timer	Set the unit to turn on or off at specific times
Remote Control	Convenient operation from a distance

Installation

Carefully unpack the air conditioner and inspect for any damage. Follow these steps for installation:

Choose a suitable window for installation.
Secure the mounting brackets according to the instructions.
Slide the air conditioner into the window frame.
Plug into a grounded electrical outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select cooling mode and fan speed.
Set the desired temperature using the remote control.
Program the timer if needed.

CAUTION! Ensure the unit is properly installed before powering on.

Specifications

Cooling Capacity: 22,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V, 60Hz.
Dimensions: 26 x 24 x 18 inches.
Weight: 100 lbs.
Noise Level: 56 dB.
Air Flow: 500 CFM.

Controls and Settings

Access settings via the digital display or remote control. Key controls include:

Power, Mode, Fan Speed, Temperature Up/Down, Timer.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. No additional devices are required for operation.

Operating the Air Conditioner

To operate the air conditioner:

Press the power button to turn on.
Select the desired cooling mode.
Adjust the temperature and fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance is essential for optimal performance:

Clean or replace the air filter monthly.
Inspect the unit for any debris or blockages.
Ensure the drainage system is clear.

Regulatory Information

This air conditioner complies with all applicable safety and efficiency standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check the outlet and power cord.
No cooling	Incorrect settings	Ensure the unit is set to cooling mode.
Excessive noise	Debris in the unit	Inspect and clean the air conditioner.
Water leakage	Blocked drainage	Clear any blockages in the drainage system.

Service: For further assistance, contact customer service at 1-800-374-4432.