Frigidaire CRA256ST210 Air Conditioner Manual

The Frigidaire CRA256ST210 is a 25,000 BTU window-mounted air conditioner designed for cooling large rooms up to 1,600 square feet. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode to optimize energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air louvers, and a washable filter.

Feature	Description
Cooling Capacity	25,000 BTU for large room cooling
Energy Efficiency Ratio (EER)	High EER for reduced energy consumption
Remote Control	Convenient operation from a distance
Programmable Timer	Set cooling schedule to save energy
Washable Filter	Easy maintenance for optimal performance
Adjustable Louvers	Direct airflow where needed
Quiet Operation	Designed for minimal noise during operation

Installation

Carefully unpack the air conditioner and inspect for any damage. Follow the installation instructions to securely mount the unit in a window.

Remove the window sash and prepare the window frame.
Install the mounting brackets as per the manual.
Slide the air conditioner into the window frame.
Secure the unit and ensure it is level for optimal performance.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select cooling mode using the remote or control panel.
Adjust the temperature setting to your comfort level.
Set the fan speed according to your preference.
Utilize the programmable timer for energy savings.

CAUTION! Ensure the unit is properly installed before operating.

Specifications

Cooling Capacity: 25,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Room Size: Up to 1,600 square feet.
Power Supply: 230V/60Hz.
Air Flow: 600 CFM.
Noise Level: 56 dB (low speed).
Dimensions: 26.5 x 28 x 20 inches.
Weight: 130 lbs.

Controls and Settings

Access settings via the digital display or remote control. Key controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Settings include cooling mode, energy saver mode, and fan-only mode for versatility.

Connecting Devices

Ensure the air conditioner is properly connected to a power source. No additional devices are required for operation.

Ensure the unit is plugged into a dedicated outlet.
Do not use extension cords.

Tip: Use a surge protector to safeguard against power surges.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings using the remote or control panel.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Set the fan speed as needed.
Utilize the timer for scheduled operation.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean or replace the filter every month during peak usage.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	No power supply	Check power connection and outlet.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set correctly.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Improper installation	Ensure unit is level and properly installed.

Service: For further assistance, contact customer service at 1-800-374-4432.