Frigidaire FAC066L7A2 Air Conditioner Manual

The Frigidaire FAC066L7A2 is a 6,000 BTU window-mounted air conditioner designed for cooling small to medium-sized rooms. It features adjustable temperature settings, multiple fan speeds, and an energy-saving mode. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Remote control, adjustable thermostat, multiple cooling speeds, energy saver mode, and a programmable timer.

Feature	Description
Remote Control	Convenient operation from a distance
Adjustable Thermostat	Set your desired temperature easily
Multiple Cooling Speeds	Choose the right cooling level for your comfort
Energy Saver Mode	Helps reduce energy consumption
Programmable Timer	Set the air conditioner to turn on/off at specific times

Installation

Unpack and inspect contents. Ensure the window is suitable for installation.

Remove the air conditioner from the box and packaging.
Install the mounting brackets according to the window size.
Place the air conditioner in the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the setup instructions.

Set the desired temperature using the thermostat.
Select the fan speed according to your preference.
Activate the energy saver mode if desired.

CAUTION! Ensure the air conditioner is level for optimal performance.

Specifications

Cooling Capacity: 6,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V/60Hz.
Air Flow: 200 CFM.
Noise Level: 52 dB.
Dimensions: 18.5 x 20.5 x 14.5 inches.
Weight: 50 lbs.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, MODE, FAN, TEMP UP/DOWN, TIMER.

Modes: Cool, Fan, Energy Saver. Adjust settings for optimal comfort.

Connecting Devices

Ensure the air conditioner is plugged into a suitable outlet. No additional devices are required for operation.

Check the power supply before connecting.
Ensure the unit is properly installed in the window.

Tip: Use a surge protector for added safety.

Operating the Air Conditioner

To operate, simply power on and set your desired temperature and fan speed.

Press the POWER button to turn on.
Adjust the temperature and fan settings as needed.
Use the timer function to schedule operation.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean or replace the air filter monthly.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power supply issue	Check outlet and power cord.
Not cooling	Dirty filter	Clean or replace the air filter.
Excessive noise	Improper installation	Ensure unit is level and secure.
Water leakage	Blocked drain	Clear any blockages in the drain.

Reset: Unplug for 10 minutes to reset the unit.

Service: 1-800-374-4432; www.frigidaire.com