Frigidaire FAC080J7A Air Conditioner Manual

The Frigidaire FAC080J7A is an 8,000 BTU window-mounted air conditioner designed to cool rooms up to 350 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer for convenience. The unit also includes a remote control for easy operation and a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 8,000 BTU cooling capacity, remote control, energy saver mode, programmable timer, washable filter.

Feature	Description
Cooling Capacity	8,000 BTU, suitable for rooms up to 350 sq. ft.
Fan Speeds	Multiple speeds for customized comfort.
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Remote Control	Convenient operation from a distance.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect contents. Ensure window frame is suitable for installation.

Remove the air conditioner from the box and packaging.
Install the mounting brackets according to the instructions.
Place the unit in the window and secure it properly.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

Select cooling mode using the mode button.
Set the desired temperature using the temperature controls.
Adjust fan speed as needed.
Utilize the timer function for automatic operation.

CAUTION! Ensure the air conditioner is placed on a stable surface.

Specifications

Cooling Capacity: 8,000 BTU.
Room Size: Up to 350 sq. ft.
Energy Efficiency Ratio (EER): 12.1.
Power Supply: 115V, 60Hz.
Dimensions: 19.5 x 20.5 x 12 inches.
Weight: 55 lbs.
Noise Level: 52 dB (low setting).

Controls and Settings

Access settings via the remote control or control panel on the unit. Controls include power, mode selection, temperature adjustment, and fan speed.

Remote: Power, Mode, Temperature Up/Down, Fan Speed, Timer.

Connecting Devices

Ensure the air conditioner is properly plugged into a grounded outlet.

Turn off the air conditioner before connecting any devices.
Use the remote control for operation.

Tip: Ensure the unit is off before performing any maintenance.

Operating the Air Conditioner

Use the remote control to operate the air conditioner effectively.

Press the power button to turn on the unit.
Select the desired cooling mode and temperature.
Adjust fan speed as necessary.
Utilize the timer function for scheduled operation.

WARNING! Do not block the air intake or exhaust vents.

Accessibility Features

The air conditioner includes easy-to-use controls and a remote for accessibility.

Care & Cleaning

Unplug before cleaning. Clean the filter regularly and wipe the exterior with a damp cloth.

CAUTION! Do not use harsh chemicals or abrasive materials.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Settings or filter	Ensure settings are correct; clean or replace filter.
Excessive noise	Improper installation	Check installation and secure the unit.
Water leakage	Clogged drain	Clear any blockages in the drain.

Reset: Unplug the unit for a few minutes to reset.

Service: For assistance, contact customer service at 1-800-374-4432.