Frigidaire FAC105T1A5 Air Conditioner Manual

The Frigidaire FAC105T1A5 is a 10,000 BTU window-mounted air conditioner designed to cool rooms up to 450 square feet. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode for efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance and Care 7. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air direction, and energy saver mode.

Feature	Description
10,000 BTU	Cools rooms up to 450 sq. ft.
Energy Saver Mode	Automatically turns off the fan and compressor when the room is cool enough.
Remote Control	Conveniently adjust settings from across the room.
Programmable Timer	Set the unit to turn on or off at specific times.
Adjustable Air Direction	Direct airflow where you need it most.

Installation

Unpack and inspect contents. Ensure window frame is suitable for installation.

Install mounting brackets according to window size.
Lift the air conditioner into the window frame.
Secure the unit and ensure it is level.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the unit; follow the remote control instructions.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Use the up/down buttons.
Adjust fan speed: Choose from low, medium, or high.

CAUTION! Ensure the unit is properly installed before operation.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Energy Efficiency Ratio: 12.1 EER.
Power Supply: 115V/60Hz.
Dimensions: 24.5 x 20.5 x 15 inches.
Weight: 75 lbs.

Controls and Settings

Access settings via the digital display or remote control. Features include temperature adjustment, fan speed selection, and mode selection.

Remote: POWER, MODE, FAN, TEMP UP/DOWN.

Maintenance and Care

Regularly clean or replace the air filter to maintain efficiency. Ensure the unit is unplugged before cleaning.

CAUTION! Do not use harsh chemicals or abrasive materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cool air	Dirty filter	Clean or replace the air filter.
Water leakage	Improper installation	Ensure unit is level and properly installed.
Excessive noise	Loose parts	Tighten screws and check for obstructions.

Service: For further assistance, contact customer support.