Frigidaire FAC125P1A3 Air Conditioner Manual

The Frigidaire FAC125P1A3 is a 12,000 BTU window-mounted air conditioner designed for cooling rooms up to 550 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key features include: 12,000 BTU cooling capacity, remote control, energy saver mode, programmable timer, and adjustable air direction.

Feature	Description
Cooling Capacity	12,000 BTU for rooms up to 550 sq. ft.
Energy Saver Mode	Automatically turns off the fan and compressor when the room is cool enough.
Remote Control	Conveniently adjust settings from a distance.
Programmable Timer	Set the air conditioner to turn on or off at specific times.
Adjustable Air Direction	Direct airflow where needed.

Installation

Follow these steps for proper installation:

Choose a suitable window for installation.
Remove the air conditioner from the box and inspect for damage.
Install the mounting brackets according to the instructions.
Slide the air conditioner into the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely mounted to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select your desired cooling mode.
Set the fan speed according to your preference.
Program the timer if needed.

CAUTION! Ensure the air conditioner is level for optimal performance.

Specifications

Cooling Capacity: 12,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 300 CFM.
Noise Level: 56 dB.
Dimensions: 19 x 21 x 14 inches.
Weight: 75 lbs.
Power Supply: 115V, 60Hz.

Controls and Settings

Access controls via the front panel or remote. Settings include cooling mode, fan speed, and temperature adjustments.

Remote: POWER, MODE, FAN, TEMP UP/DOWN.

Maintenance

Regular maintenance is essential for optimal performance:

Clean or replace the air filter every month.
Check the drainage system for blockages.
Wipe down the exterior with a damp cloth.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No cooling	Incorrect settings	Check and adjust settings; ensure unit is in cooling mode.
Unit is noisy	Loose parts	Check for loose screws or components.
Water leakage	Blocked drainage	Inspect and clear any blockages in the drainage system.
Remote not working	Dead batteries	Replace batteries in the remote control.

Service: For further assistance, contact Frigidaire customer support.