Frigidaire FAC125T1A3 Air Conditioner Manual

The Frigidaire FAC125T1A3 is a 12,000 BTU window-mounted air conditioner designed to cool rooms up to 550 square feet. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode to optimize energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air direction, and energy saver mode.

Feature	Description
Digital Display	Shows current temperature and settings
Remote Control	Conveniently adjust settings from a distance
Adjustable Air Direction	Directs airflow where needed
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached
Programmable Timer	Set the unit to turn on or off at specific times

Installation

Unpack and inspect contents. Ensure window frame is suitable for installation.

Remove the air conditioner from the box and packaging.
Install the mounting brackets according to the instructions.
Place the air conditioner in the window and secure it.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the air conditioner; follow the on-screen prompts.

Select cooling mode: Press the mode button to choose between cool, fan, and energy saver.
Set desired temperature: Use the up/down arrows to adjust the temperature.
Set timer: Use the timer button to program on/off times.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 12,000 BTU.
Room Size: Up to 550 sq. ft.
Energy Efficiency Ratio (EER): 12.1.
Power Supply: 115V, 60Hz.
Noise Level: 54 dB (low), 60 dB (high).
Dimensions: 21.5 x 19 x 14.5 inches.
Weight: 75 lbs.

Controls and Settings

Access settings via the digital display or remote control. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: Power, Mode, Fan Speed, Temperature Up/Down, Timer.

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, press the power button and select your desired mode and temperature.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Use the fan speed button to choose between low, medium, and high.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regularly clean the air filter and ensure the unit is free from obstructions.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure unit is set to cool mode and temperature is set correctly.
Excessive noise	Obstructions	Check for obstructions around the unit.
Water leakage	Improper installation	Ensure unit is level and properly installed.

Service: For further assistance, contact customer service.