Frigidaire FAC126N1A Air Conditioner Manual

The Frigidaire FAC126N1A is a 12,000 BTU window-mounted air conditioner designed to cool rooms up to 550 square feet. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode to help reduce energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air louvers, and a washable filter.

Feature	Description
Cooling Capacity	12,000 BTU for rooms up to 550 sq. ft.
Energy Saver Mode	Automatically turns off the fan and compressor when the room reaches the set temperature.
Remote Control	Conveniently adjust settings from across the room.
Programmable Timer	Set the air conditioner to turn on or off at specific times.
Washable Filter	Helps reduce allergens and is easy to clean.

Installation

Ensure the window is suitable for installation. Follow the included instructions for mounting the unit securely.

Remove the air conditioner from the packaging.
Install the mounting brackets according to the window size.
Slide the air conditioner into the window frame.
Secure the unit and ensure it is level for proper drainage.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Plug in the air conditioner and set the desired temperature using the remote or control panel.

Press the power button to turn on the unit.
Select the desired cooling mode.
Adjust the temperature using the up/down buttons.
Set the fan speed according to your preference.

CAUTION! Ensure the air conditioner is plugged into a grounded outlet.

Specifications

Cooling Capacity: 12,000 BTU.
Energy Efficiency Ratio (EER): 12.0.
Air Flow: 350 CFM.
Dimensions: 19.5 x 21.5 x 15 inches.
Weight: 75 lbs.
Power Supply: 115V, 60Hz.
Noise Level: 56 dB.

Controls and Settings

Access settings via the digital display or remote control. Options include temperature adjustment, fan speed, and mode selection.

Modes: Cool, Fan, Energy Saver.

Fan Speed: High, Medium, Low.

Connecting Devices

No external devices are required for operation. Ensure the unit is plugged into a standard electrical outlet.

Operating the Air Conditioner

To operate, simply turn on the unit and select your desired settings.

Press the power button to start.
Choose the cooling mode and set the temperature.
Adjust the fan speed as needed.

WARNING! Do not block the air intake or exhaust.

Maintenance and Care

Regularly clean the filter and ensure the air intake is unobstructed.

CAUTION! Unplug the unit before performing any maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure unit is set to cooling mode.
Excessive noise	Loose parts	Inspect for loose components.
Water leakage	Improper installation	Check for level installation.

Reset: Unplug the unit for 10 seconds to reset.

Service: For assistance, contact 1-800-374-4432 or visit www.frigidaire.com.