Frigidaire FAH106R2T Air Conditioner Manual

The Frigidaire FAH106R2T is a 10,000 BTU window-mounted air conditioner designed for cooling rooms up to 450 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer. The unit includes a remote control for convenience and is equipped with a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, multiple cooling speeds, energy saver mode, programmable timer, washable filter.

Feature	Description
Cooling Capacity	10,000 BTU for rooms up to 450 sq. ft.
Fan Speeds	Multiple speeds for customized comfort
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached
Remote Control	Convenient control from a distance
Washable Filter	Easy to clean and maintain
Programmable Timer	Set the unit to turn on or off at specific times

Installation

Unpack and inspect the air conditioner. Ensure you have the necessary tools for installation.

Choose a suitable window for installation.
Install the mounting brackets according to the instructions.
Carefully lift the air conditioner into the window frame.
Secure the unit and ensure it is level.
Plug into a grounded outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner and set the desired temperature using the remote or control panel.

Select the cooling mode.
Adjust the fan speed as needed.
Set the programmable timer if desired.

CAUTION! Ensure the air conditioner is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Energy Efficiency Ratio (EER): 12.1.
Power Supply: 115V, 60Hz.
Dimensions: 24 x 20 x 15 inches.
Weight: 75 lbs.
Noise Level: 56 dB (low speed).

Controls and Settings

Access controls via the remote or the control panel. Settings include temperature adjustment, fan speed, and mode selection.

Remote: Power, temperature up/down, fan speed, mode selection.

Additional settings include timer and energy saver mode.

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, simply power on the unit and select your desired settings.

Press the power button to turn on.
Select cooling mode and adjust the temperature.
Use the fan speed button to choose your preferred speed.

WARNING! Do not block the air intake or exhaust.

Accessibility Features

The air conditioner is designed for ease of use, with large buttons and a remote control for convenience.

Care & Cleaning

Unplug the unit before cleaning. Use a soft, dry cloth to clean the exterior and a vacuum to clean the filter.

CAUTION! Do not use water or cleaning solutions on the unit.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Settings or filter	Ensure settings are correct; clean filter.
Excessive noise	Improper installation	Check installation and secure the unit.
Remote not working	Batteries	Replace batteries in the remote control.

Reset: Unplug the unit for 5 minutes to reset.

Service: For assistance, contact customer service at 1-800-374-4432 or visit www.frigidaire.com.