Frigidaire FAH106S2T-A Air Conditioner Manual

The Frigidaire FAH106S2T-A is a 10,000 BTU window-mounted air conditioner designed to cool rooms up to 450 square feet. It features multiple cooling and fan speeds, a programmable timer, and an energy saver mode to help reduce energy consumption. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Digital display, remote control, adjustable air direction, and energy saver mode.

Feature	Description
Cooling Capacity	10,000 BTU for rooms up to 450 sq. ft.
Fan Speeds	Multiple speeds for customized comfort.
Energy Saver Mode	Automatically turns off the fan and compressor when the room is cool enough.
Programmable Timer	Set the air conditioner to turn on or off at specific times.
Remote Control	Convenient control from a distance.

Installation

Unpack and inspect contents. Ensure window is suitable for installation.

Install the mounting brackets according to the instructions.
Lift the air conditioner into the window frame.
Secure the unit and ensure it is level.
Plug into a grounded electrical outlet.

WARNING! Ensure the unit is securely installed to prevent accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts.

Select cooling mode using the remote or control panel.
Set desired temperature using the temperature controls.
Adjust fan speed as needed.
Utilize the programmable timer for convenience.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Energy Efficiency Ratio (EER): 12.1.
Power Supply: 115V, 60Hz.
Dimensions: 24 x 20 x 15 inches.
Weight: 70 lbs.
Noise Level: 56 dB (low setting).

Controls and Settings

Access settings via the digital display or remote control. Controls include temperature adjustment, fan speed selection, and mode selection (cool, fan, energy saver).

Connecting Devices

Ensure the air conditioner is plugged into a grounded outlet. No additional devices are required for operation.

Operating the Air Conditioner

To operate, use the remote or control panel to select the desired mode and temperature. Monitor the digital display for settings.

Maintenance and Care

Regularly clean the air filter and ensure the unit is free of obstructions. Unplug before cleaning.

CAUTION! Do not use harsh chemicals; only use a damp cloth for cleaning.

Regulatory Information

This air conditioner complies with all applicable safety and performance standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Unit not plugged in	Check power connection and outlet.
No cooling	Temperature setting too high	Lower the temperature setting.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Improper installation	Ensure unit is level and properly installed.

Reset: Unplug the unit for 5 minutes to reset.

Service: For service inquiries, contact 1-800-374-4432 or visit www.frigidaire.com.