Frigidaire FAH106S2TA12 Air Conditioner Manual

The Frigidaire FAH106S2TA12 is a 10,000 BTU window-mounted air conditioner designed to cool rooms up to 450 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer for convenience. The unit is equipped with a remote control for easy operation and includes a washable filter for easy maintenance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, Remote Control, Energy Saver mode, Programmable timer, Washable filter.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Energy Saver Mode	Automatically turns off the compressor when the desired temperature is reached.
Remote Control	Allows for easy operation from a distance.
Programmable Timer	Set the air conditioner to turn on or off at specific times.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect contents. Ensure the window is suitable for installation.

Prepare the window: Remove any obstacles and ensure a secure fit.
Install the mounting brackets: Follow the included instructions for proper placement.
Place the air conditioner in the window: Ensure it is level for optimal performance.
Secure the unit: Use screws and brackets provided to secure the air conditioner.
Plug into AC power: Ensure the outlet is properly grounded.

WARNING! Air conditioner is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on the air conditioner; follow the remote control instructions.

Set the desired temperature: Use the remote control to adjust settings.
Select cooling mode: Choose between different cooling and fan speeds.
Program the timer: Set the air conditioner to turn on or off at specific times.

CAUTION! Ensure the unit is securely installed before operation.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V, 60Hz.
Dimensions: 24 x 20 x 15 inches.
Weight: 75 lbs.
Noise Level: 56 dB (low speed).

Controls and Settings

Access settings via the remote control. Front Panel: Power, Mode, Fan Speed, Temperature controls.

Remote: Power, Mode selection, Temperature adjustment, Timer settings.

Cooling modes: Cool, Fan, Energy Saver. Fan speeds: High, Medium, Low.

Connecting Power

Ensure the air conditioner is plugged into a properly grounded outlet.

Check the power cord for damage before plugging in.
Use a dedicated circuit to avoid overloading.
Ensure the outlet matches the air conditioner's voltage requirements.

Tip: Avoid using extension cords with the air conditioner.

Operating the Air Conditioner

To operate the air conditioner, use the remote control or front panel buttons.

Turn on the unit: Press the power button on the remote or front panel.
Select cooling mode: Choose the desired mode using the remote.
Adjust temperature: Set your preferred temperature using the remote control.
Monitor performance: Check the filter indicator for maintenance reminders.

WARNING! Do not block the air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the washable filter every month.
Inspect the unit for dust and debris.
Ensure the drainage system is clear.

CAUTION! Unplug the unit before performing maintenance.

Regulatory Information

This air conditioner complies with all applicable safety standards and regulations. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check power cord and outlet.
No cooling	Settings or filter	Ensure settings are correct; clean the filter.
Excessive noise	Loose parts	Check for loose screws or components.
Water leakage	Improper installation	Ensure unit is level and properly installed.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-374-4432; www.frigidaire.com