Frigidaire FAH106T2T0 Air Conditioner Manual

The Frigidaire FAH106T2T0 is a 10,000 BTU window-mounted air conditioner designed to cool rooms up to 450 square feet. It features multiple cooling and fan speeds, an energy saver mode, and a programmable timer. The unit is equipped with a remote control for convenience and includes an easy-to-clean washable filter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Air Conditioner 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: 10,000 BTU cooling capacity, remote control, energy saver mode, programmable timer, washable filter.

Feature	Description
Cooling Capacity	10,000 BTU, suitable for rooms up to 450 sq. ft.
Fan Speeds	Multiple cooling and fan speeds for customized comfort.
Energy Saver Mode	Automatically turns off the fan and compressor when the room is cool enough.
Remote Control	Convenient control from a distance.
Washable Filter	Easy to clean and maintain for optimal performance.

Installation

Unpack and inspect contents. Ensure window is suitable for installation.

Prepare the window: Ensure it is clean and free of obstructions.
Install mounting brackets: Follow the included instructions for proper installation.
Place the unit in the window: Securely fasten the air conditioner in place.
Plug into AC power: Ensure the unit is properly connected to a power source.

WARNING! Ensure the unit is securely installed to avoid accidents.

First-Time Setup

Power on the unit; follow the remote control prompts.

Select cooling mode: Use the mode button on the remote.
Set desired temperature: Adjust using the temperature controls.
Program timer: Set the timer for automatic operation.

CAUTION! Ensure the unit is level for optimal performance.

Specifications

Cooling Capacity: 10,000 BTU.
Room Size: Up to 450 sq. ft.
Energy Efficiency Ratio (EER): 12.0.
Power Supply: 115V/60Hz.
Dimensions: 24 x 20 x 15 inches.
Weight: 70 lbs.
Noise Level: 56 dB (low speed).

Controls and Settings

Access settings via the remote control or control panel. Features include cooling mode, fan speed, temperature adjustment, and timer settings.

Remote: Power, mode selection, temperature controls, fan speed, timer.

Connecting Devices

Ensure the air conditioner is properly connected to a power source before operation.

Check power supply: Ensure the outlet is functional.
Use an extension cord only if necessary and rated for the unit.

Tip: Avoid using multiple devices on the same outlet to prevent overload.

Operating the Air Conditioner

Follow the instructions for optimal cooling performance.

Turn on the unit: Press the power button on the remote or control panel.
Select cooling mode: Choose the desired mode for operation.
Adjust temperature: Set to your comfort level.

WARNING! Do not block air intake or exhaust vents.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the washable filter monthly.
Inspect the unit for debris and clean as necessary.
Ensure the drainage system is clear.

Regulatory Information

This air conditioner complies with all applicable safety standards. For support, visit www.frigidaire.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit does not turn on	Power supply issue	Check outlet and power cord.
No cooling	Incorrect settings	Ensure cooling mode is selected and temperature is set low enough.
Excessive noise	Debris in unit	Inspect and clean the unit.
Water leakage	Clogged drain	Check and clear the drainage system.

Reset: Unplug the unit for 5 minutes to reset.

Service: 1-800-374-4432; www.frigidaire.com