Frigidaire FHWW144TE1 Air Conditioner Manual

The Frigidaire FHWW144TE1 is a 14,000 BTU window-mounted air conditioner designed for cooling rooms up to 700 square feet. It features a programmable timer, remote control, multiple cooling speeds, and energy-saving modes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Maintenance 7. Troubleshooting

Features at a Glance

Key components: 14,000 BTU cooling capacity, remote control, programmable timer, multiple fan speeds, and energy saver mode.

Feature	Description
Cooling Capacity	14,000 BTU for rooms up to 700 sq. ft.
Remote Control	Convenient control from a distance.
Programmable Timer	Set the unit to turn on/off at specific times.
Multiple Fan Speeds	Choose from low, medium, and high settings.
Energy Saver Mode	Helps reduce energy consumption.
Filter Access	Easy access to clean or replace the filter.

Installation

Carefully unpack the air conditioner and inspect for any damage. Follow the steps below for proper installation.

Choose a suitable window for installation.
Secure the mounting brackets and slide the air conditioner into the window frame.
Ensure the unit is level for optimal performance.
Plug the unit into a grounded outlet.

WARNING! Ensure the window is securely closed to avoid accidents.

First-Time Setup

Power on the air conditioner and follow the on-screen prompts to set your preferences.

Select your desired cooling mode.
Set the temperature using the remote control.
Program the timer for automatic operation.

CAUTION! Ensure the unit is properly installed before use.

Specifications

Cooling Capacity: 14,000 BTU.
Room Size: Up to 700 sq. ft.
Power Supply: 115V, 60Hz.
Energy Efficiency Ratio (EER): 12.0.
Noise Level: 56 dB (low setting).
Dimensions: 25.5 x 20.5 x 19 inches.
Weight: 80 lbs.

Controls and Settings

Access settings via the control panel or remote. Features include temperature adjustment, fan speed selection, and mode settings.

Remote: POWER, TEMP UP/DOWN, FAN SPEED, MODE, TIMER.

Maintenance

Regular maintenance is essential for optimal performance. Clean the filter monthly and check for any obstructions.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Incorrect settings	Check temperature settings and mode.
Remote not working	Dead batteries	Replace batteries in the remote.
Excessive noise	Improper installation	Ensure unit is level and securely mounted.
Water leakage	Clogged drain	Check and clear the drain line.

Service: For further assistance, contact customer support.